Product ID:GA2-008 MIL-E-52798
MSDS Date:01/01/1985
FSC:8010
NIIN:00-111-7943
MSDS Number: BCZDZ

ENTERPRISE CHEMICAL COATING CO

Emergency Phone: 312 376-9150

Cage: 60035

ENTERPRISE CHEMICAL COATING CO DIV OF INSILCO CORP

CHICAGO, IL 60608-5322 US

Cage: 60035

RULE 66 MINERAL SPIRITS

Fraction By Weight: 35%

ACGIH TLV: 500 PPM

DIACETONE ALCOHOL (4-HYDROXY-4-METHYL-2-PENTANONE)

CAS: 123-42-2

RTECS: SA9100000

Fraction By Weight: 0.5%

OSHA PEL 50 PPM

ACGIH TLV: 50 PPM; 9192

LEAD DRIER (OSHA PEL FROM 29CFR 1910.1025)

Fraction By Weight: 0.5%

OSHA PEL 0.05 MG/M3 (PB)

ACGIH TLV: 0.15 MG/M3 (PB);8990

Effects of Overexposure:SKIN,EYE IRRITANT,HEADACHE,NAUSEA.LEAD
POISONING-INGESTION,NAUSEA.VOMITING,WEAKNESS

First Aid:SKIN:WASH WITH SOAP AND WATER.EYE:FLUSH WITH PLENTY OF
WATER.INHAL:REMOVE TO FRESH AIR AND RESTORE BREATHING IF
REQUIRED.INGESTION: CALL DOCTOR

Flash Point:104F,40C TCC
Lower Limits:0.7
Upper Limits:6.5
Extinguishing Media:ANY CLASS B FIRE EXTINGUISHER
Fire Fighting Procedures:SEE SUPP. DATA
Unusual Fire/Explosion Hazard:ISOLATE FROM HEAT,SPARKS,OPEN FLAME,
ELECTRICAL EQUIPMENT

Spill Release Procedures:REMOVE IGNITION SOURCES AND VENTILATE
AREA,AVOID BREATHING VAPORS. CONTAIN AND REMOVE WITH
INERT,ABSORBENT AND NON-SPARKING TOOLS

Handling and Storage Precautions:STORE LARGE QUANTITIES IN BUILDINGS
DESIGNED AND PROTECTED FOR STORATE IN COMPLIANCE WITH OSHA
1910.106.
Other Precautions:NONE

Respiratory Protection:NIRMALLY NOT REUQIRED
Ventilation:LOCAL EXHAUST
Protective Gloves:NOT REQUIRED
Eye Protection:GOGGLES/SAFETY GLASSES
Supplemental Safety and Health
FIRE FIGHTING WEAR FULL PROTECTIVE EQUIP INCLUDING SELF CONTAINED
BREATHING APPARATUS KEY1:F4

HCC:F4
Boiling Pt:B.P. Text:340F,171C
Vapor Pres:2
Vapor Density:4.9
Spec Gravity:1.262
Evaporation Rate & Reference:< BUTYL ACETATE
Solubility in Water:NEGLIGIBLE
Appearance and Odor:FIELD DRAB LIQUID WITH ALAPHATIC ODOR
Percent Volatiles by Volume:60

Stability Indicator/Materials to Avoid:YES
GREASE,WATER
Hazardous Decomposition Products:CARBON MONOXIDE ON BURNING
Conditions to Avoid Polymerization:ELEVATED TEMPS.

Waste Disposal Methods:IN ACCORDANCE WITH LOCAL,STATE AND FEDERAL
REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.